Pelatihan Inovatif Pembuatan Batako Berbasis Limbah Pasir Silika untuk Mendukung Konstruksi Ramah Lingkungan

Era Agita Kabdiyono; Rifaldi Adi Saputra; Nela Ibda Salamah; Robi Afif Maulana; Triyatno Triyatno; Wengku Ardhiyansyah; Muhamad Iqbal Ramdhani

doi:10.62007/jouipi.v4i2.958

Authors

Era Agita Kabdiyono Universitas Dian Nusantara
Rifaldi Adi Saputra Universitas Dian Nusantara
Nela Ibda Salamah Universitas Dian Nusantara
Robi Afif Maulana Universitas Dian Nusantara
Triyatno Triyatno Universitas Dian Nusantara
Wengku Ardhiyansyah Universitas Dian Nusantara
Muhamad Iqbal Ramdhani Universitas Dian Nusantara

DOI:

https://doi.org/10.62007/jouipi.v4i2.958

Keywords:

Concrete Blocks, Environmentally Friendly, Silica Sand, Sustainability, Training

Abstract

The training on making bricks based on silica sand waste was carried out as an effort to introduce alternative environmentally friendly building materials while supporting industrial waste management. This activity is designed with an integrated method that includes introduction to theory, hands-on practice, and product evaluation. At the theoretical stage, participants were given an understanding of the characteristics of silica sand and its potential use as a substitute material in construction. The practical stage involves the process of mixing materials, brick molding techniques, as well as drying products to ensure quality that meets standards. Evaluation is carried out by assessing the results of bricks based on strength, density, and consistency of shapes. The results of the activity showed that participants were able to master the right mixing techniques, understand the printing process, and realize the importance of industrial waste management to support environmental sustainability. The implications of this training not only create new economic opportunities through the use of waste into use-value products, but also contribute to the reduction of negative impacts on the environment. Thus, this training is a strategic step in encouraging environmentally friendly technological innovation while increasing public awareness of the importance of sustainable industrial waste management.

References

Leliana, A., Puspitasari, A., & Apriliani, N. F. (2021). Pelatihan Pemanfaatan Fly Ash Sebagai Bahan Campuran Pembuatan Batako Di Geger Madiun. Madiun Spoor (Jpm), 1(2), 52–56. https://doi.org/10.37367/jpm.v1i2.186

Ningrum, P., Maizir, H., & Asnawi, M. (2022). Penggunaan Limbah Serbuk Kayu Untuk Campuran Pembuatan Bata Ringan Hariskon. Dinamisia Jurnal Pengabdian Kepada Masyarakat, 6(5), 1291– 1296. https://doi.org/10.31849/dinamisia.v6i5.11477

Prendika, W., Syafei, D., & Nasirly, R. (2022). Pengaruh Penambahan Silika Abu Kelapa Sawit Pada Batako Agropolimer. Alkimia Jurnal Ilmu Kimia Dan Terapan, 5(2), 166–172. https://doi.org/10.19109/alkimia.v5i2.7138

Saputro, Y. A. (2023). Pelatihan Pembuatan Dan Kontrol Mutu Batako Di Kabupaten Ponorogo. Jurnal Pengabdian Masyarakat Multidisiplin, 7(1), 121–126. https://doi.org/10.36341/jpm.v7i1.3565

Siti Zalikha, N., Maisarah, N., Afrizal, N., Marzuki, F., & Arf, N. A. (2023). Pemberdayaan Perempuan Dalam Meningkatkan Kemandirian Ekonomi Melalui Inovasi Pembuatan Sabun Cuci Piring Di Desa Kandang Kecamatan Samalanga. Khadem Jurnal Pengabdian Kepada Masyarakat, 2(1), 148–168. https://doi.org/10.54621/jkdm.v2i1.786

Zainuri, Z., Zargustin, D., Yanti, G., & Megasari, S. W. (2019). Pengurangan Emisi CO2 Dari Pemanfaatan Limbah Pelepah Kelapa Sawit Pada Produksi Batako Serat. Jurnal Teknologi Lingkungan, 20(1), 37. https://doi.org/10.29122/jtl.v20i1.3111